SINGER W1405 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WINDING THE BOBBIN
1. Release clutch by turning clutch knob
toward you.
2. Draw thread from spool through
bobbin winder tension disc as shown.
3. Pull end of thread through hole in
bobbin as shown.
4. Place bobbin onto bobbin winder
shaft with end of thread coming from
the top of the bobbin. Push bobbin
winder shaft to the right until it clicks.
Holding onto end of thread, start
machine.
When
bobbin
is
slightly
filled, snip off end of thread.
5.
Wind
thread
until
winder
stops.
Remove bobbin. Clip thread.
6. Tighten clutch knob.
Advertising