SINGER W1405 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLE SHOOTING: CAUSES AND REMEDIES
IF THREAD FORMS LOOPS
CAUSE
Thread tension not properly regulated
Needle thread not properly threaded and/or bobbin thread
not properly wound
Thread size not suited to fabric
Thread check spring not working properly
REMEDY
Read instructions for regulating rfeedle-and bobbin thread tension
Thread machine properly and/or wind bobbin thread correctly
See "Size of needle and thread"
Have spring replaced
SHRINKING OR PUCK!ERING OF THE SEAM
Tension too tight
Sewing foot pressure too strong
Read instructions for regulating r|eedle-and bobbin thread tensions
Read instructions for regulating sjewing foot pressure
IRREGULAR STITCHES
Needle and bobbin threads of poor quality
Bobbin thread unevenly wound
Use top quality threads
Re-wind bobbin
MACHINE DOES NOT RUN FREELY AND MAKES A NOISE
Machine needs oiling
Dust and thread in shuttle
Wrong oil used, has now clogged machine
Drive belt tension too tight
Read instructions on how to oil I
Read instructions on how to cleajn shuttle race
Clean machine carefully and re-oil with top quality oil
Loosen tension of drive belt
-
35
-