SINGER 14SH644 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Thread the top cover thread
^
guide by pulling the thread
downward until it slips
under thread guide 2 .
While holding thread with finger, pass it between
the tension discs and pull thread down to make
certain it is properly located In between the
tension discs 3 .
Thread the looper area of the machine following the
orange color coded thread guides ( 4 ~ 7 ).
Thread the hole In the upper looper from front to
back 8 .
Note: Use of tweezers provided in the accessory
set to aid in threading the looper.
Pull about 10cm (4 inches) of thread through the
looper and place to the back of the throat plate.
13
Advertising
This manual is related to the following products: