Stretch overedge, To set the differential feed adjusting lever – SINGER 14SH644 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
( Stretch Overedge
Stretch overedge is ideal for sewing decorative
collars, sleeves, skirt hems, etc. on loosely knit and
woven fabrics.
To set the differential feed adjusting lever
• Set differential feed adjusting lever knob above
graduation "1.0".
To sew a seam, apply gentle tension to the fabric
by holding the seam lightly in front and back of the
presser foot.
Note: * If amounf of “stretch” is not correctly set in
relation to the fabric being sewn, the fabric
is apt to shift away from the needle
resulting in improperly sewn overedge
seam. In such case, reset differential teed
adjusting lever closer to the center mark.
+ Be sure to reset the differential feed
adjusting lever to graduation "1.0" for
normal overedge stitching.
24