Chaining off and test sewing – SINGER 14SH644 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
20. CHAINING OFF AND TEST
SEWING
• When the machine is completely threaded, bring all
of the threads over the throat plate and slightly to
the left under the presser foot.
• Hold the threads and apply a slight tension.
• Turn the hand \wheel toward you 2 or 3 complete
turns to start the thread chain.
• Lower presser foot.
Continue holding the chain and press on the foot
controller until the chain is 5 ~ 7.5cm (2 ~ 3 inches)
in length.
Place fabric under the front of fhe presser foot and
sew a test sample.
Note: Do not pull on the fabric while sewing as this
may deflect fhe needle, causing it to break.
№
ii
^
''1
u T.
m
k
1 ^
A —5.:; ^5 Cm
( 2 ~ 3 ' ) ~ ~
28