SINGER W5135 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

_ ^

PLACING BOBBIN CASE IN SHUTTLE

Open hinged cover plate left of the needle.

(See 12, Fig. 1) Hold the bobbin case latch, (D),

Fig. 9, between the thumb and forefinger of the left

hand, with at least three inches of thread running
from the top of the bobbin case to the right. Insert
and center the bobbin case on the stud of the shuttle

body, (C). Be sure

the

bobbin

case

finger,

(E),

is

op­

posite

the

shuttle

race

notch,

(A).

Press

the

bobbin

case

(B)

into

the

shuttle as far as pos­
sible

until

latch

catches

on

the

center

post

of

the

shuttle.

THEN release the bobbin case latch, (D).

Press bobbin case again after latch has been re­

leased

to

make

sure

the

bobbin

case

is

Iccked

securely in place. Close the cover plate.

Fig. 9

Fig. 10

Li

--vv '

C

;f ■

-I

c I

C ^

Advertising
This manual is related to the following products: