SINGER W5135 - Manual (Page 9)

'‘'3
'¿1
THREADING THE
BOBBIN CASE
. ■; ; ^
Step 1 (illustrated in Fig. 6).
’'1
Hold bobbin case between thumb
. j- ^ and forefinger of left hand, so that
the slot in the edge of the bobbin
case is on top. Take the bobbin
between thumb and forefinger of
right hand so that the thread on
top leads from left to right. Step
2. Insert bobbin into bobbin case,
pull the thread into the slot of the
>
i3
bobbin case as shown in Fig.7, and
■ draw it under the tension spring
and into the fork-shaped opening
-■ o
:*i
of the spring as shown in Fig. 8
■"o
t
d ^
#
I*i
Fig. 6
Fig. 7
Fig. 8