Tbl'rnrd!* 7“ 7 “7, Embroidering with a hoop, 7 t7:::7r"'*7e71 – SINGER W5135 User Manual
Page 18: 7 t7:::7r
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ie
tbl'rnrd!* 7“ 7 “7"""
°‘ =““=»-■
Look threads bv t' ^ °
'^"=5' »“**'■ C°°“tue until flower design is oomplete.
threads by setung st.tch width at 0 and taking 3 or 4 stitches in center of design.
EMBROIDERING WITH A HOOP
It IS easy to follow a stamped design or to work
free hand when embroidering or monogramming.
(.See Fig. 24). Release the pressure from the foot
by pressing down the snap lock on the automatic
darner. Turn the drop feed knob to "DARN" posi
tion.
Stretch the fabric in an embroidery hoop, and
place
under
the
needle
after
removing
the
presser
foot. Set the stitch width at the size you prefer and
lower the presser bar lifter. Then operate the nrachine at a rather high speed while noving
7 t7:::7r"'
*7e
71
« I
c *
e I'
eh.r
C'
Sir
c
c- %
c; iKj--
e
C'7i-
jm
t - f
%
V..