Chapter 4. basic zig-zag stitching, Adjusting machine stitch to suit your fabric, How to set selectors – SINGER 7110 User Manual

Page 21: Pattern group selector, Needle position selector, Stitch width selector, Adjusting machine to suit your fabric

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Chapter 4. Basic Zig-Zag Stitching

adjusting machine stitch to suit your fabric

You can do functional as well as decorative
zig-zag stitching with your sewing machine.

How to set selectors

PATTERN GROUP SELECTOR

Before moving sefector, make sure needle is
out of the fabric.

For plain zig-zag stitching:

• Set stitch width selector on

j

(straight stitch)

• Turn pattern group selector to / aligning

number under T mark

Pattern Group Selector: /

1

Needle Position:

• Stitch Width: :

• Stitch Length:.5 -4 to suit fabric

• General Purpose Needle Plate

• General Purpose Foot

NEEDLE POSITION SELECTOR

Before moving selector, make sure needle is
out of the fabric.

^УIost of your zig-zag stitching will be done in
centre X needle position.

Left Im and right A settings are used for

special stitch placement, as in button sewing.

STITCH WIDTH SELECTOR

Before moving selector, make sure needle is

out of the fabric.

To produce a plain zig-zag or a decorative
stitch, the stitch width selector is moved from
its straight stitch position j to any of its

other five positions. The further you move the

selector lever toward the right, the wider your
stitch will be.

Left

n

Centre

n

Right

0

J.

Needle Position Selector

¥

Stitch Width Selector

] 9

Advertising