Honeycomb stitch – SINGER 7110 User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HONEYCOMB

STITCH

■ \/\

The honeycomb stitch is ideal for smocking and it is useful for mending, overcast­

ing and attaching lingerie elastic, stretch lace and blanket binding. Use this ver­

satile stitch to create decorative designs on fabrics that stretch.

Replacing Lingerie Elastic

® Pattern Group Selector; 3

®

Needle Position; . i®, iX: X

® Stitch Width:

j:- .

® Stitch Length; (Coloured Bar)

® Stitch Balance; To suit application or fabric

® Genera! Purpose Needle Plate

® Genera! Purpose Foot

• ■ \

Joining Elastic

We recommend the needle style 2045 when

sewing on regular elastic.

@ Fit elastic for desired snugness at waistline,

allowing 2.5 cm (1 inch) for joining. Lap
ends to form a band and straight stitch
together as shown using a ball point needle.

® Divide elastic band into four equal segments

and mark with pins. Do the same to the

garment. Then pin together at correspond­

ing points, pinning elastic over right side of

fabric, top edges even.

® Sew a few straight stitches to anchor elastic

to fabric.

® Select honeycomb. Plain zig-zag, and multi­

stitch zig-zag are also effective for replacing

lingerie elastic.

® Then hold elastic and garment edge taut as

you stitch so that it will remain stretchable
after stitching is completed.

CAUTION: Do not pull the fabric while you are

stitching as this may deflect the needle, caus­

ing it to break.

31

Advertising