I fe i s; ii it – SINGER 7110 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SELECTING A PATTERN GROUP

Before moving pattern group selector, make
sure needle is above fabric.

When you rotate the pattern group selector,

one of five different groups of stitch pattern is
available to you.

Slide stitch width selector to i , then rotate
the pattern group selector as required, until
the number of the desired group of two stitches

is positioned under the T symbol above the
selector.

<

<:

1 ^

ADJUSTING WIDTH OF THE DESIGN

Before moving stitch width selector, always
raise needle above fabric.

To produce a stitch pattern, th^ stitch width

selector must be moved from j toward the

right- The further you move the selector lever

toward the right, the wider your stitch will be.

■lllie!

Si
SI?

ir':

Г'?'*

I Í S CÌ Sv2

i fe I S; ii It

Stitch Width Selector

ADJUSTING STITCH PLACEfiENT

Before moving needle position selector, make
sure needle is above fabric.

All stitch patterns can be sewn in either left

, centre X » or right J, needle position

Selector setting centre

X

is used most often.

A X left or Д right setting is used to

place narrow stitch patterns to the left or right

of the centre in decorative work.

Left

I 1

Centre

Right

25

Advertising