SINGER W117 - Manual (Page 11)

The Multiple Slot Binder
The popidariiy ior bindings that do double dntv «
dinnnishea. Bindings are frequently used to finish
of fabric as well as furnishing a garment’s onW ®
-- , Th. MulUpl. Slot bM “ST
irAbV.ri SX““#?
making of dainty garrmfr,*
caU for narrow binding wln^thl
SfSSL"' “> \
SstLl; ^
each designed to carry binding oi
their width. Size 1-2-3-4-B. ^ ”
Commercial single fold bindine
must U used and fed into th!
slots of same size as illustrated
The familmr % inch or H inch
bias cut binding which every
« entered
t^nough the open mouth of the
The Binder is adjustable side­
wise to bring the stitching pron-
Fisur. 17 erly close to the edge of binding
Exclusive Bindings with the
Multiple Slot Binder ^
Remove the presser foot, attach Binder in its place. «
As shown in Fig. 18 the Multiple Slot Binder can be used S
for attractive combination trimmings so much in vogue on
jabots and frilled accessories.
Our illustration shows a tricolored trim using com­
mercial single fold bindings sizes 1—3 and B. Sizes 5 and 3
act as two tone pipings while size 1 binds the edge enclosing
the fabric in the double piping all in one single stitching.
This trimming is just as effective on the reverse side of fabric
making it a desirable accomplishment for any dainty cascade.
Eighteen
Fisur» 18
riin bindings to a decided point and enter each width
•t respective slot helping it beyond the needle with the i
f a large needle or pin and starting with the narrow,
•dth The edge to be bound is inserted in the center of i
¡l^chment between the scroll and held in as far as possil
without crowding.
Manv lovely double binding combinations are possible
sevCTal different sizes; 1 and 3; 2 and 4; or 3 and 6.
Binding with Bias Cut Binding
Binding that has been cut and prepared for Bind
should be cut to a long point, inserted into the scrolls
Binder and helped forward beyond the needle by the aid of
large pin. Lower presser bar and stitch to ascertain whe
stitching line appears on binding.
.Nineteen