SINGER W117 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Shirring

The Shirring Plate is used to

make wide ruffles, deep headings
on ruffles, and for continuous rows

of shirring.

To Use Shirring Plate:

1 Remove handhole cover. Put Shirring Plate on machine

Doint “YY” in screw hole of needle plate. Point

eoes in squared opening of needle plate, and is held

in'place with handhole cover, replaced at this point.

0 Remove lower blade and heading guide by loosening

fmSl screw on right side of Ruffler. and slipping for­
ward. Tighten small screw.

3. Put Ruffler on machine as before.

4.

Set attachment

for ruffling. For

several rows of
shirring, it helps

to use the Quilt­
ing Guide for

spacing.

Piping »nd Edgestitching to Ruffle

Shirring Plate. Enter material to 1

Use Huffier

right. Guide into seam-allowan<

ruffled be^een

piping through

slot of Shirring

^

fabric. Guide folded edg

on left- Fold

"tnd above blades. To adjust the guu

into slot above pipi 8

screw behind needle ho

needle sews on veijf

Twenty-four

Twenty-five

Advertising