SINGER W117 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
nsoT* I
Six
F1*u« t
Threading the Bobbin Case
Hold bobbin case with thumb and first finger of lef
hand, with tension tongue (4) upright. Then place fillei
bobbin in case, starting thread into slot (1). Continue pull
ing thread up to end of slot (2); then across to bottom o:
slot (8) and upward until thread comes out at top of tensioi
tongue (4). Leave about two inches of thread projecting.
Caution —Note carefully the way the bobbin case ii
threaded before removing bobbin or unthreading.
Seven
Advertising