Threading the bobbin case – SINGER W1317 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
THREADING THE
BOBBIN CASE
Step 1 (illustrated in Fig.
6
).
Hold bobbin case between tbumb
and forefinger of left hand, so that
the slot in the edge of the bobbin
case is on top. Take the bobbin
between thumb and forefinger of
right hand so that the thread on
top leads from left to right. Step
2
.
Insert bobbin into bobbin case,
pull the thread into the slot of the
bobbin case as shown in Fig. 7, and
draw it under the tension spring
and into the fork-shaped opening
of tile spring as shown in Fig.
8
.
Fig. 5
TENSION SPRING
Fig.
6
i
Fig. 7
Fig. 8
Advertising