Priss-o-matic regulator – SINGER W102 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
PRiSS-O-MATIC REGULATOR
The Press-o-matic controls the pressure of the presser foot on the
material and can be regulated to exert normal pressure when pressed
down all of the way. . .or regulated to eliminate all pressure if the
outside ring (Fig. 12) is pressed to permit the presser bar (Fig. 13)
to raise about three-quarters of an inch. If you attempt to sew
without pressure, the material must be moved by hand.
When sewing on thin or sheer materials set the presser bar to
number 2 or number 3 position. . .all the way down for normal or
heavy material.
Fig. 12
Fig. 13
13
Advertising