Replacing bobbin case, Straight sewing – SINGER W102 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REPLACING BOBBIN CASE
Hold bobbin case by grasping latch with thumb and forefinger of left
hand. Fig. 21.
Place bobbin case on hook or shuttle pin. Close latch by pushing it
until it clicks into place.
Fig. 21
STRAIGHT SEWING
Use long stitches for heavier materials-increasing in length as weight
of material increases.
Use shorter stitches for lighter weight materials-very short for thin
or sheer materials to avoid seam puckering.
NOTE: Do not pull or hold back on the material, but guide it only.
(Pulling or holding back on the material-in addition to
forming uneven stitches-will break or bend the needle).
19
Advertising