French seam (felling) – SINGER W102 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FRENCH SEAM (FELLING)

Proceed in the following manner;

1- Lay two pieces of cloth one on top of the other with their

RIGHT sides facing each other. The right edge of the bottom

piece must extend about 1/8 inch beyond the right edge of the
top piece. See (Fig. 24).

1 Sew both pieces of cloth together. Use the right edge of long

toe of hemmer foot to guide the botton, piece of „ateri.l. while

the left edge of the same toe serves

as a guide for the top piece of

material. (Fig. 25).

Open and spread out material and

put back on machine right sides

down-ward. Make sewn edges of

material stand up.

Fold over the edges to the left and

insert them into the scroll of the

hemmer foot. Sew as you would

do ordinary hemming. Use left edge

of long toe of hemmer foot as guide,

having orgmal seam run alongside

3.

4.

of it.

TOP PIECE

BOTTOM PIECE

1ST STEP

« ' I D T H O K l O F

2ND STEP

21

Advertising