Starting to sew – SINGER W102 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STARTING TO SEW
When starting to sew, the
thread take-up lever must be
at its highest position to
prevent the needle from
becoming unthreaded.
Hold the free end of the
upper thread lightly and turn
p¡g/ ~
^ ’
the hand wheel towards you until the lower thread comes up.
Pull the ends to the back, being sure that the upper thread goes
down, through and under the presser foot. Place material under the
presser foot.
Lower the presser foot.
Start the machine and guide the material by letting the machine feed
itself.
Do not pull on the material.
Do not run the machine unless there is material under the presser
foot.
Do no, run the machine with
the presser foot raised.
Fig. l(i
15