Straight stitching – SINGER W801 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
eding
You
*ssary
• f the
trol.
STRAIGHT STITCHING
P
For straight sewing on fine fabric or very soft material,
may want to use the straight stitch presser foot and
straight stitch needle plate which are included in your
box. ' Both have narrow needle slots.
jnd remove
accessory
Changing the Presser Foot and Needle Plate;
(
1
)
Presser Foot
(
a
) Loosen thumb screw (iB, Fig. 1)
zigzag presser foot.
(B) Repbce with straight stitch presser foot (Fig.
2 2 - A )
(2)
Needle Plate
(
a
) Slide cover plate (16, Fig.’l) to the left as far
as possible.
(B)
Remove screws holding needle plate (15, Fig. 1)
to bed plate.
(C)
Remove zigzag needle plate.
(p) Replace with straight stitch needle plate (Fig.
22^B)
Be sure to set the stitch width ot 0 or the .needle
will break in striking the foot or plate.
•Jurn knob “B” (Fig. 23) to the left as far as it will go
this will set zigzag width control A at 0 position.
Fio. 22-A
Fig. 23