SINGER W801 - Manual (Page 16)

iiii
rflwu.
rPffin
m
Drop feed, set stitch width lock at 5. take 3 or 4 stitches, leave needle m fabric left of
Pivot fabric on needle to make next daisy petal. Continue until flower design is complete,
['ck ^threads by setting stitch width at 0 and taking 3 or 4 stitches in center of design.
embroidering with a hoop
I, IS easy to follow a stamped design or to
rk free hand when embroidering or monogram-
(See Fig. 26). Release the pressure from
"h^ foot by pressing down on the snap lock ring
jg%er Push the drop feed button down all the
'^'Wretch the fabric in an embroidery hoop, and
1 ce under the needle after removing the presser
Set the stitch width at the size you prefer
d lower the presser bar lifter. Then operate the
I „1 <-i mther high speed while moving the
ho°op sbv^ with both hands. Work carefully and be sure to keep fingers out of the path of
encounter skip stitches, the fabric is not stretched tight enough or a doming spFmg
deeded (see attachments available from your dealer illustrated in the back of this book).
DARN OR MONOGRAM WITHOUT HOOP
,£ „ , Wish to darn or monogram without embroidery hoop, leave zigzag
JL release all pressure on presser foot, set stitch length at 0 , set zigzag stitch width to suit
°'"whTn''^dJrning'"o?*mon^og^raming in this manner, the fabric must be heU taut or skipped stitches
will be encountered.