Winding the bobbin, Winding the bobbin u – SINGER W801 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig. 3
WINDING THE BOBBIN
u
Fig, 4
Disengage the hand wheel (l, Fig. 3) from the stitching mechanism by turning the
clutch (2, Fig. 3) toward you or counter clockwise. Place a spool of thread on one of
the spool pins and lead thread though the arm th read guide (3, Fig. 4). Run end of
thread through
a
hole in the bobbin edge and place bobbin on spindle of bobbin winder
(
4
, Fig. 4) fitting the notch on bobbin over small pin on spindle. Push bobbin winder
(
5
, Fig. 4) to the right, and hold thread end loosely then start machine slowly.
Bobbin will stop winding when it is filled. Turn clutch away from you until sewing
mechanism is again engaged so that needle moves when you turn the hand wheel.
Break off loose thread end used to start the winding.