Caution – SINGER 112 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Zigzag Sewing Machine
Instruction Manual and Parts List
Loosen and remove screws and remove face plate by
sliding it downward.
Remove screws and lift off arm top cover.
Clean and oil the places indicated with * C f .
Apply sufficient oil to all oil felt shown in Figure?
Apply a small amount of grease to gear teeth
indicated with letter 'B*.
Also apply a drop of oil to all other oiling points shown
Keep oil pad 'A' under arm top cover saturated with
oil.
Figure 7
Caution;
Switch off the machine.
Set sewing head upright again using both hands.
Danger of crushing between sewing head and table top.
For youf safety, do not run the machine without the belt cover.
Important:
When you first operate your machine after set up or after an extended period of disuse, oil the machine and run your
machine at 1,000 to 1,500 spm for about 10 minutes for the purpose of bread-in.
12-