Safe operation – SINGER 112 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Zigzag Sewing Machine

Instruction Manual and Parts List

1.2. Safe Operation

To avoid the risk of electric shock, do not open the motor wiring box and do not touch the components
assembled inside the wiring box.

To avoid injuries do not run the machine without the belt cover or in case any other safety device is

removed.

To avoid possible injuries keep fingers, head and clothes far from wheel, belt and motor when the

machine is running. Nothing should be placed near those parts.

To avoid injuries never put your fingers next to the rotating hook and the thread take-up lever cover
when the machine is running.

The rotating hook whirls at high speed while the machine is running. To avoid hand injuries, keep them
away from the rotating hook while the machine is running, turn off the machine to replace the bobbin.

To avoid possible injuries be careful when putting down or lifting the machine head.

To avoid accident in case of a sudden start of the machine always turn it off when laying it down, or

remove the belt cover and the belt.

If you machine is equipped with a servomotor, it does not make noises while being driven. To avoid a
possible accident caused by an unexpected start, be sure the machine is turned off.

To avoid electrical shock, do not run the machine without proper grounding.

To minimize the risk of accidents or damage in electric components caused by electric discharge turn
the machine off before unplugging it.

Clean the machine periodically.

- 5 -

Advertising
This manual is related to the following products: