Safety instructions, L.’tiportant safety instructions, Important safety instructions – SINGER 112 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Zigzag Sewing Machine
Instruction Manual and Parts List
1.
Safety Instructions
1.1.
l.’Tiportant Safety Instructions
When using this machine, basic safety procedures must be follow'-d Poad with attention all itistruction before
using the machine. When using the machine, undersland all basic safely instructions which are not limited to the
Items following. Read ail instructions, take care of this manual, and use it as rcfereitre when necessary.
•
Before running the machine, make sura all relevant safety specifications are adequate to specifications
and technical rules in ycui country.
•
The machine should not Oc run without its safety devices.
*■
Tile machine shoulrj only be operated by properly trained personnel.
•
For your safety, goggles must be used r unning the nnachine.
•
Turn off or unplug the machine when the follov.inj:' situations arise;
o Passing ttie thread by the needle or r eplacing the bobbin or looper.
o Replacing needle, presser fool, throat plate, feed dog and sliding piaie.
cj When the machine is in maintenance.
o When the operator is not running the madiine.
In case of lubricant oil contact with the eyes or skin, washed the surface with plenty of icy water wiUi a
generous amount of cold water. In case of ingestion, seek medical help immediately.
Repair, fitting or mair.tenatice shouid only be performed by properly trained personnel.
Maintenance and repair on electric equipment should only be made by qualified personnel. If cny
electrl;.. device is damaged, the machine should be immediately stopped.
Before starting the machine in full running, a test must be conducted to assure that machine and
operator are able to perform the task.
The .machine should not be placed next to a sound source as an ultrasonic welding machine and other
equipment.
The machine should only be run with the proper electric cable and connectors, and also the adequate
grounding.
The machine shouid only be used to sew materials as indicated.in its instruction manual, and
indications of use should be followed.
Singer will not be held responsible for any damage caused by unauthorized changes in the products.