Turning a square corner – SINGER W1624 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
V
Sew reverse stitches for reinforce
ment at end of seam.
J
Draw fabric to left when sewing is
finished.
-
17
-
TURNING A SQUARE
CORNER
To turn a square corner 1.6cm (5/8")
from the fabric edge, stop stitching
with the needle tip piercing the
fabric, when reaching the cornering
guide as shown. Raise the presser
foot, turn fabric. New stitching line
will align with 1.6cm (5/8") seam
guide on side of needle plate. Lower
the presser foot and begin stitching
in new direction.
Advertising