Adjusting the density, Cutting buttonholes – SINGER W1624 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Bar tacking: Set pattern selection
dial( I ) and sew 5-6 stitches.
Right
Side:
Change pattern to ( Q )•
Sew side from front to back until it
reaches the end line.
r
Left Side:
Change pattern to ( |j )■
Sew left side from back to front until
it reaches the end line.
Bar
tacking:
Change
pattern
to
( Q ) and sew 5-6 stitches.
,
Adjusting The Density
Adjustment of the density of the
stitches may be required according
to the different kinds of fabrics.
Cutting Buttonholes
Stick a needle or pin through bar
tacks to prevent over-cutting.
Cut buttonhole along center with
buttonhole cutter.
-24-
Advertising