Mending a rip – SINGER W1624 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
MENDING
Set machine as shown.
Place the patch over the worn part.
Pull thread ends toward back or left
when starting sewing. Sew along
the edge of the patch on the right
side. Trim away the worn part close
to the seam on the wrong side.
Mending a Rip
Set machine in the same way as for
patching.
Sew the edges of tear together first.
Then sew two more seams on either
side.
A piece of gauze can be placed
underneath to reinforce the rip.
-26-
Advertising