Set size of buttonhole, Attach buttonhole foot – SINGER W1624 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
BUTTONHOLE SEWING
SET SIZE OF BUTTONHOLE
Pull the buttonhole holder to the back
until the end, place the button in it,
push the stopper backwards trapping
the button in between the buttonhole
holder and stopper, and fully tighten
by fixing the screw. Remove the
button.
ATTACH BUTTONHOLE FOOT
Draw up the lower thread.
Pull the thread of the needle thread through
the needle hole of the buttonhole foot, attach
the buttonhole foot and draw both needle
thread and lower thread to the left. Insert the
fabric under the foot, and lower the needle
at the starting point.
Than lower the buttonhole foot.
Advertising