Chapter 7. twin - needle stitching, X: j. only, Only – SINGER 6106 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 7. Twin - Needle Stitching
The
twin-needle
simultaneously
produces
two
parallel, closely spaced lines of pattern stitch
ing. You can stitch with either one or two col
ours of thread.
• Needle Position: L.
• Stitch Width:
| ^ |
• Pattern Group Selector; Stitch desired
X: J. only
5
$ only^
• Stitch Length: . 5 - 4 to suit fabric
• General Purpose Needle Plate
• General Purpose Foot or Special Purpose Foot
Procedure
• Insert twin-needle.
•
Thread as for single-needle stitching, ex
cept pass thread between centre and back
tension discs A, and through right eye of
needle.
•
Attach detachable spool pin, with felt, in
hole on top cover.
•
Place spool of thread on detachable spool
pin and thread machine in usual way, except
pass
thread
from
second
spool
between
centre and front tension discs B, as shown.
•
Thread
through
remaining
points,
making
certain to omit the thread guide above the
needle and pass thread through left eye of
needle.
A
CAUTION; Do not use a stitch width greater than what ts recommended. A wider stitch will result In needle breakage.
35