How to thread the bobbin case – SINGER W1514 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
HOW TO THREAD THE BOBBIN CASE|
Refer to Figs. 6, 7 and 8 to familiarize yourself with the procedure. Hold the bobbin
case in your left hand with the tongue pointing up. Let about two inches of thread
hang free from the bobbin, and insert bobbin into case so that tljiread will be rotating
counter-clockwise.
Guide the thread end through the slot on the side of the case aid under the tension
spring until it enters the small notch on the edge of the spring.
Fig. 6
Fig. 7
Fig. 8
.. -:i
■■'I
-.■m
^W'
Advertising