How to use the darner, adjust pressure, Drop feed adjustment – SINGER W1514 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO USE THE DARNER, ADJUST PRESSURE
To release the pressure from the presser foot so the material
can. be moved freely for darning and mending, press down
snap lock (A, Fig. 16) and cap B will pop up.
To return pressure to normal, push darner cap B all the way
down again.
For
a
slighter
pressure
when
sewing
thin
materials,
push
darner only part way down. Test for correct position on a
scrap of fabric.
DROP FEED ADJUSTMENT
The height of the feed can be adjusted to suit the fabric or
type of work being done. Turn knob A, Fig. 17, to SILK
position to sew on thin materials, or all the way to DARN
position for darning. Turn dial to the right to return feed
to NORM, or normal. Consult the following chart to deter
mine the level of the feed and darner for various t
3
/pes of
sewing.
Type of Sewing
Sewing thin material
Darning
Sewing thick material