SINGER W1514 - Manual (Page 12)

■ '■ ->.- r 'V';''
1) Place spool of tliread on spool pin.
2) Lead thread through upper thread
guide A on back of face plate
3) down and around tension discs B
from back to front
4) into check spring C
5) then tug on thread to pull it into
hook D Cs®® insert, Pig. 10)
6) up into take-up lever E from back
to front
7) down into thread guide F on face
plate
8) through the needle bar thread
guide G
9) and into needle from left to right.
Pull three or four inches of thread
through needle.
Tii. ¿i* n
Fig. 10