Principle parts, Principle parts —5 – SINGER W710 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRINCIPLE PARTS
Controi Panel Cover ,. ^
covers pattern selector dial, release button, one-step buttonhole
control dial, stitch density controi, bobbin winder and bobbin
winder guide.
t-'t-C ,■ t 'i -
Pattern Selector Dial
selects pattern desired. May be turned in any direction.
Pattern Selector Release Button
is pushed down to release pattern selector dial.
<■" Pattern indicator Window
shows all the stitch patterns available. Relative stitch length
setting is color coded for each stitch pattern. Yellow indicator
shows the stitch chosen.
Tension Dial
has two discs which regulate the amount of tension on the
needle thread.
Take-up Lever
regulates the flow of thread through the needle. It has an
open eyelet to simplify threading. The take-up lever should
always be in the highest position when beginning or ending
sewing.
Face Plate
opens to the left to allow for easy changing of the light bulb.
Check Spring
helps control the flow of thread through the needle.
releases flaps for flat sewing surface,
holds the presser foot in place,
holds the needle in place.
Flap Release Knob
Thumb Screw
Needle Clamp Screw
Presser Foot
holds the fabric in place for sewing. Snap-on feet are provided
with the sewing machine. Various interchangeable soles are
included in the accessory box. The front of the presser foot
shank is white to make needle threading easier.
Needle Plate Release Lever
pushes the needle plate up for easy removal.
Diamond Point Feed Dog
moves the fabric after each stitch is formed, The diamond
points give a gentle feed for delicate fabrics as well as an
accurate feed for heavy fabrics.
Needle Plate
has guide lines on the left and right for greater sewing
accuracy. It snaps off for easy cleaning.
Flat Sewing Surface Brace
holds flaps up for flat sewing airface.
Flat Sewing Surface Flaps
are released and braced whenever a flat sewing surface is
desired or access to the bobbin is needed.
Pressure Control
controls the amount of pressure on the fabric. The illustrated
plate indicates the proper position for various fabrics.