SINGER W710 - Manual (Page 9)

ELECTRICAL CONNECTIONS
Insert the plug with the indenta­
tions on the underside into the
socket on the right side of the
machine. The plug will only go
in one way. Place the foot con­
trol in such a position that your
foot rests comfortably on it.
insert the plug into a wall outlet,
110-120V.
SEWING LIGHT
The switch at the right side of
machine is the master switch for
on-off of both the light and the
motor. It is also for selection of
speed between fast and slow
sewing.
With the switch at "LOW" posi­
tion, powerful slow speed sew­
ing, less than 650 rpm is possible.
At "HIGH", sewing speed
reaches upto 950 rpm maximum.
The tight is turned on when the
switch is set at these positions.
At the lower range you may en­
counter a noticable hum or in­
crease in motor noise. This is
common due to the increased
power or torque needed to
operate your machine.
With the switch at "OFF" posi­
tion, the electric circuits for both
light and motor are completely
shut off. When machine is not
in use, always turn the switch off
for safety.
Ths S 6wiri3 iigHt is !oc3t6d in
face cover directly over the
needle to better illuminate the
stitching area.
With the power switch at the
right side of machine on "HIGH”
or "LOW” speed position, The
light simultaneously turns on,
and with the switch on "OFF"
the light also turns off.
Tt-
TTC;.