Straight stitching – SINGER W8931 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
12
STRAIGHT STITCHING
For straighi sewing on fine fabric or very soft
material, you may want_to use
the
straight stitch presser
straight stitch needle plate which are in-
SeSlf slots^“"^^ accessory box. Both have narrow
,
Foot and Plate. To change presser
lo°sea thumb screw 18 and remove
Replace with hinged narrow foot and
tighten screw securely.
remove screws
I ^
attached. Turn assembly
wrong side up. Hold needle plate with right
hanA a-nA
cover plate with left. (Fig. 12)
f
r plate down slightly and pull
oSlia?iov^“^Tr'^'
P“ rieedle plate
out oi groove. Tiieix slide lower pin out.
P^®*f straight stitch plate by revers-
procedure. Slip pin on lower side of
needie plate into groove on cover plate.
f
under hp and into groove on cover
°u machine and fasten securely with
needle plate screws.
.^^^®
^®* *R® stitch width at 0. or the needle
will break in striking the foot or plate.
rim of zigzag dial A, Fig. 13, and
press down on lock B. Turn dial as far to the left as
possible. Pointer will then be on the zero mark.
Pig. 13
C
*
C
c