Preparing to sew – SINGER W8931 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

vS

SEWING THIN OR UGHT WEIGHT FABRICS.

When lighter pressure is required to sew satisfactorily on

thin silk or filmy material, the pressure cap should be about
halfway down. Release all the way by pressing fhe snap lock
A, Fig. 20, a=d then press cap B down again to kaliw.y spot

Lower the feed slightly by pressing the down button fFig. 19.

to the red line.

'

DARNING AND MONOGRAMMING. In order to move the

fabric freely in any direction for darning, mending and certain
kinds of free-iiand embroidery, release the pressure cap B com­
pletely by pressing down on the snap lock. A, Fig. 20. Press

down button (Fig. 19) all the way down which drops the feed
well below the needle plate. To return feed to normal, press

the up button all the way down.

15

Fb- 20

P R E P A R I N G T O S E W

Have take-up lever at highest point before starting to sew. Do not try to help the feeding

as ^this may deflect the needle and cause it to break.

I

n

EVER

run machine without material under presser foot.

Place matenal and threads in position under the presser foot and lower the presser foot Turn

the hand wheel toward you until the needle is at its highest point. You are now ready to

tw tHtaS th ^

the needle at its highest point, it is not necessary to touch the hand

wheel to Starr the machine. You merely press the control. The speed of the machine is re
gulated by increasing or decreasing the amount of pressure exerted on the control

,

' *

■ ■ ’'’

a

Y Y--A.

;.yr-

Advertising