SINGER W8931 - Manual (Page 21)

21
-f
3
•.a
9
Э
9
>
}
)
)
)
)
2
яг
I
Vi
HOW TO USE ACCESSORIES
Seam gauge or clotb. guide (Item 6 Fig. 37) use tde seam gauge as a guide for straight
seams and even rows of stitching along edges of fabric. Fasten gauge with ассотрапзппд screw
(Item 11 Fig. 37) in threaded hole in bed of machine (Fig. 28) adjust to seam width desired.
NARROW rlEMMER. (Item 10 Fig. 37). With the needle at its highest position, replace
regular presser foot with narrow hemmer (Fig. 29). For a plain narrow hem, make a 1 8* inch
double fold for about two inches along edge of fabric. Hold each end of the two inches fold, slip
underneath hemmer. Bring fold up into the scroll of hemmer, lowering presser bar lifter,
gently pull ends of thread as you start stitching.
' '
Guide material slightly to right, and it will automatically take a double turn through scroll.
^ . LACE TRIMMED HEM. To sew a narrow hem and attach lace in one stitching, insert lace
in the slot next to needle (Fig. 30). Sew hem as above, guiding lace under needle and hem
into scroll.
)
)
>
>
i
Э
Э
)
i
)
Fig. 28 29