Attachment foot, The edgestitches – SINGER W1066 (older model) User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
23
I =
F,9- 26
ATTACHMENT FOOT
In
order
to
attach
the
binder,
edgestitcher
and
the
hemmers,
it
is
necessary
to
remove
the
presser
foot
and
replace it with the attachment foot. Fig. 26.
Mount
binder,
edgestitcher
or
hemmers
sliding
the
attachment to the left as far as possible and tighten screw.
The mounting slot enables you to sew as close to or
as
far
away
from
the
edge
as
desired.
Just
move
the
attachment
to
the
correct
position
before
tightening
the
mounting screw.
THE EDGESTITCHES
The
edgestitcher
is
used in
making
lace insertions, edgings and pipings.
The slots serve as guides. To sew lace
edging to fabric, place the material you
want on top in slot. 1 (Fig. 27) and the
other piece in slot 4. (Fig. 28)
To trim with a wide piping, place
Fig. 27
28
the fabric in slot 4, and the fold of the
.. -i ¡. o rho folded edge
of
p.pmg to the left in slot 3, ior a narrow piping, place the fabric rn slot 2 and the folded edge
the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a french seam.
i’.