To oil the machine, Fig. 32 – SINGER 301 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
26
T O O I L T H E M A C H I N E
If the machine is used continuously, it should
be oiled daily. If moderately used, an occa
sional oiling is sufficient.
Apply one drop of oil at each of the places in-
indicated by arrows in Figs. 29, 31, 32 and 33.
To Lubricate Spiral Gears
About once a year, take out two screws W,
Fig. 29, remove cover X, Fig. 29 and apply
a small quantity of lubricant to spiral gears Y
and EE, Fig. 30, then replace cover X and
fasten as before with screws W.
Never apply oil to these gears.
Fig, 30, Lubricating Points for Spiral Gears
JJJ 7* nn
/
]\/I rt 1 rt rt
Swing face plate to left and oil the places in
dicated by arrows in Fig. 31, then close face
plate.
To Oil Sewing Hook
Occasionally apply a drop of oil to bobbin
case base bearing in sewing hook indicated in
Fig. 32.
27
OIL
Fig. 32. Oiling Point in Sewing Hook
Fig. 31. Face Plate Opened Shoiving Oiling Points