SINGER 147-81 - Manual (Page 10)

18 MACHINE BASE
No. Plate
51576E 21038
9842 21038
131022 21038
131279 21038
131264 21038
131328 21038
Name
Machine Base Screw Stud Nut (3)......
..................... Washer (3)..
" " " " Bushing (rubber)
(4)..............................
Machine Cushion (felt) (4)...........
Machine Base complete, Nos. 131263,three
each 9842,51576E,54477 and four each
131205 and 131279................
Machine Base and Oil Drain Jar (swinging
type) complete. Nos. 131264 and
131268...........................
MACHINE BASE OIL DRAIN JAR
(SWINGING TYPE)
No. Plate Name
131185 21038 Jar (glass)..........................
131191 21038 “ Cap...............................
131188 21038 " Clamp.............................
131217 " " 131188 with 131189..............
131189 21038 " '' Lever..........................
1247C 21038 " " " Hinge Screw (2)...............
131265 21038 Nipple (long) (2)....................
131266 21038 " (short)..........................
131267 21038 " Elbow (2)........................
131268 21038 Machine Base Oil Drain Jar (swinging
type) complete. Nos. 131185, 131191,
131217, 131266 and two each 1247C,
131265 and 131267................
STRIP FOLDER FOR FACING
SLEEVES ON SHIRTS
FOR 147-81 MACHINE
No.
121657
Plate
20710 Strip Folder,
Name
121682 20710 I I n Edge Guide...............
227J 20710 I t " " Screw.............
121681 20710 I I Holder...................
1174J 20710 I I I I " Screw (2)...........
121683 20710 Strip Folder complete. Nos. 227J,121657,
121681 and 121682................
19
THREAD UNWINDER
FOR TWO SPOOLS
No. Plate Natne
225257 20692 Spool Rest (for two spools) with 201018C
150203 20692 " " Cushion (felt) (2)...........
225388 20692 " " Rod..........................
200383C 20692 " " “ Set Screw...............
201018C 20692 " " - Set Screw..................
202490 20692 " Stand with 200383C................
225391 20692 Thread Guide (2)........................
201696J 20692 " " Lock Nut...................
225326 20692 " " Position Cup...............
225324 20692 " " Rod with 208AL and 225322..
208AL 20692 " " “ Screw.................
225322 20692 " " " Washer................
150086 20692 “ Separator......................
150060 20692 " " Bracket Arm With 164J and
9525..............................
164J 20692 Thread Separator Bracket Arm Clamping
Screw.............................
9525 20692 Thread Separator Bracket Arm Clamping
Screw Washer......................
164J 20692 Thread Separator Bracket Arm Screw......
9525 20692 " " " " " Washer
150087 ---- Thread Separator complete. Nos. 164J,
9525, 150060 and 150086...........
150088 20692 Thread Unwinder complete. Nos. 150087,
2016960,202490,225257,225324,22„5326,
225388, two each 150203, 225391 and
three wood screws 7/8 In. No. 12....
27739 20692 Thread Cone (wood) for large cones......
225390 20692 " ” Holder, for Inverted cones..
Note: Nos. 27739 and 225390 are used with, but not
Included In 150088.