SINGER 147-81 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER In the
FIRST column.
The number stamped on a Sewing Machine Part Is in every case
the number of the single part only.
EveiY combination of parts sent out as such has Its specific
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each number always Indicates the ЗA^t PART In whatever list
It appears, or for whatever machine.
The letters after some of the numbers Indicate the style of
finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed
A.A-Buffed and Chromium Plated
A.B-Hardened, Polished, Buffed and Chromium Plated
A.C-Brown Baking Enamel Finish
A.D-Oray Baking Enamel Finish
A.E-Hardened, Bright Rumbled and Nickel Plated
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated
B-Pollshed, Nickel Plated and Buffed
C-Hardened Only
C.R-Hardened and Merllzed
D-Pollshed Only
E-Soft, Not Polished
F-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated
0-Brlght Rumbled and Nickel Plated
H-Blued
J-Nlckel Plated Only
K-Hardened and Nickel Plated
L-Braas Plated
M-Qxldlzed
N-Japanned, Dull
P-Japanned, Bright
P.P-Wrlnkle Finish
R-Merllzed
S-Cadmlum Plated
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only
T.K-HaiTlened, Copper and Nickel Plated
T.L-Copper and Brass Plated
T.M-Copper Plated and Oxidized
U-Zlnc Plated
V-Sllver Plated
W-Pollahed and Nickel Plated
X-Black Oxide, for Iron and Steel
X.C-Kardened and Black Oxide, for Iron or Steel
Y-Black Nickel Plated Only
Z-Chromlum Plated
Z.A-Hardened,Polished,Nickel Plated,Buffed and Chromium Plated
Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated
Z.C-Hardened and Chromium Plated
Z.D-Pollshed and Chromium Plated
Z.Q-Brlght Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated
Z.J-Nlckel and Chromium Plated
Z.T-Copper and Chromium Plated
These letters MUST BE USED when they appear In the list; and
AFTER the number as In the list.
In this series:
1 to 1500, 50001 to 51500 and 140001 to 142000
are Screw Numbers
1501 to 1000 and 51501 to 51800 ar*e Nut Numbers
1901 to 2000 and 51901 to 52000 are Roller Numbers
2001 to 50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Parts.
The figures in the second column refer only to the plates,
Illustrating the parts, and are NOT TO BE USED In ordering.
Parts mai’ked with an asterisk (•) ai'e furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 147-80
FOR LIGHT WEIGHT FABRICS. ONE NEEDLE,
ONE LOOPER. LENGTH OF STITCH 10 TO 25 TO
THE INCH. NEEDLE BAR STROKE I i/g INCHES.
BALL BEARING. SPEED 4300 R. P. M.
No. Plate Name
*131446 Arm upper and lower (solid) with 948J,
15404, two 15405 and four 131022__
68428 20688 Arm Bottom Cover......................
68429 20668 " " Gasket (cork)...............
1057AL 20688 t l
" " Screw (4)...................
50608R 20688 I t Hole Plug Screw, for access to Crank
Connecting Rod (upper bearing)....
139017 20688 Arm Hole Plug Screw Washer............
68350 20695 I I Oil Cup, for oiling Arm Rock Shaft
Front Bearing.....................
131309 20696 Arm Oil Cup with 131310, for filling oil
reservoir.........................
131305 20696 Arm Oil Cup Drip Pan with two 563AL...
563AL 20696 '' " " " Position Screw (2).
131319 20695 I I “ " Oil Pad (braided cotton) for
6835 0............................