SINGER 147-81 - Manual (Page 15)

28
No. Plate
68478 20698
68479 20698
*68481 20698
Note: Whe]
Arm
to be
68482
68484
68485
68486
68468
68495
68495
68497
68500
20698
20698
20698
20700
68489 20700
68492 20703
68493 20703
68494 20703
20702
20703
68496 20703
68497 20696
68497 20703
68497 20703
68498 20703
20703
NUMERICAL LIST OF PARTS
Name
Looper Carrier Connection Shaft Sleeve
(eccentric)......................
Looper Carrier Driver with four 175E,for
68482 and 131111.................
Looper Driving Shaft and Feed Lifting
Eccentric for 68482j for 147-80 Ma­
chine ...........................
1 No. 66481 Is required for repairs, the
)tary Shaft must be returned to the factory
adjusted to the new part.
Looper Driving Shaft and Feed Lifting
Eccentric 68481 with 54027, 54227,
54228 and 68479, for 131477, for
147-80 Machine...................
Looper Driving Shaft and Feed Lifting
Eccentric Bushing................
Looper Throw-out Handle with two 443AL..
" " " Plunger...........
Needle Bar Connecting Link and Thread
(upper) Controller for 131399 and
131491...........................
Needle Bar Connecting Link Hinge Stud
(hollow) for 131399 and 131491...
Oil Pipe (back of arm) with 68497, for
oiling Feed Rocking Frame Hinge Pin
Front Bearing....................
Oil Pipe (back of arm) Clamp.........
Oil Pipe (back of arm) Connection with
68495 and two 198E, for oiling Feed
Rooking Frame Hinge Pin Back Bearing
Feed Bar Slide Block Oil Pad (wick) for
134259...........................
Oil Pipe (back of arm) Connection Oil
Pad (wick) for 68494.............
Oil Pipe (back of ai'm) Coupling.....
Feed Connecting Rod Oil Pad (wick) for
131500...........................
Looper Driving Shaft and Feed Lifting
Eccentric Front Bearing Oil Pad
(wick)...........................
Oil Pipe (back of arm) Oil Pad (wick)
for 68492........................
Oil Pipe (front of arm) Oil Pad (wick)
for 131112 and 131113 (2)........
Oil Pipe (front of arm) with 131089 and
two 1733, for oiling Looper Driving
Shaft and Feed Lifting Eccentric
Front Bearing for 131258.........
Oil Pipe (front of arm) with 1733,131064
and 131089, for oiling Arm Rotary
Shaft Front Bearing for 131258....
NUMERICAL LIST OF PARTS 29
No. Plate Name
79772 .... Bench Stand with 27998, two each 41538,
126849, three wood screws 1 1/4 In.
No. 12, four each 60656, wood screws
1 1/4 In. No. 10 and sixteen wood
screws 5/8 In. No. 7..............
120341 20691 Tweezers (curved)........................
120344 20691 Oiler (copper plated) with 120345 (Ac­
cessories) .......................
120345 20691 Oiler Spout, 4 1/2 In. long, for 120344
(Accessories).....................
120440 20691 Screw Driver (large) Accessories......
121108 20691 " " (small) Accessories......
121657 20710 Strip Folder for 121683................
121681 20710 " " Slide Holder for 121683___
121682 20710 " " Edge Guide for 121683.....
121603 20710 Strip Folder complete,for facing sleeves
on shirts, for 147-81 Machine, Nos.
227J, 121657, 121681 and 121682...
126247 20691 Bench Stand Flush Bolt for 41538.......
126248 20691 n n » « Plate for 41538..
126249 20633 Treadle for 150452.......................
126250 20633 " Spring for 150452................
126849 20691 Bench Stand Flap Hinge with four wood
screws 3/4 in. No. 7, for 79772...
127838 20695 Arm Rock Shaft Crank (front) Pin for
131474............................
128419 20698 Looper Carrier Connection Shaft Oil Pad
(braided cotton)..................
128510 20696 Balance Wheel Cover...................
131002 20703 Oil Pipe (front of arm) Connection with
two 198E, for oiling Looper Throw-
out Device........................
131003 20703 Oil Pipe (front of arm) Connection with
two 198E, for 131112 and 131113 (2)
131004 20703 Oil Pipe (front of arm) Coupling (cen­
ter) .............................
131004 20703 Oil Pipe (front of arm) Coupling (left)
131006 20700 Presser Bar Bushing (lower)........
131011 20705 Tension (upper thread) Releasing Shaft
Spring Position Plate.............
131012 20705 Tension (under thread) Bracket.....
131022 21038 Machine Base Screw Stud Bushing (rubber)
for 131446 (4)...................
131025 20709 Slack Thread Controller for 147-81 Ma­
chine.............................
131028 20698 Looper Driving Shaft and Feed Lifting
Eccentric Bushing Oil Plug........
131050 20704 Cloth Plate Slide (left) Spring for
131051............................
131051 20704 Cloth Plate Slide (left) complete for
131388, Nos. 68368, 131050 and two
725J..............................