General information, Installation requirements, For your safety – Maytag MDG120 User Manual

Page 3: Warning, Caution, Important, Receiving and handling, Dryers damaged in shipment

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

INSTALLATION
REQUIREMENTS

The following caution should be posted near
the dryer in a prominent location.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR

OTHER FLAMMABLE VAPORS AND LIQUIDS

IN THE VICINITY OF THIS OR ANY OTHER

APPLIANCE.

DO NOT DRY MOPHEADS IN THE DRYER.

DO NOT USE DRYER IN THE PRESENCE OF
DRY CLEANING FUMES.

WARNING

YOU SHOULD CAUTION USERS OF THIS

PRODUCT:

NOT TO PERMIT CHILDREN TO

PLAY IN, ON, WITH OR AROUND THIS
EQUIPMENT, AND THAT CHILDREN SHOULD
BE SUPERVISED IF NEAR DRYER(S) IN

OPERATION.

CAUTION

DRYER(S) SHOULD NEVER BE LEFT UNAT­

TENDED WHILE IN OPERATION.

IMPORTANT

1) Please observe all safety precautions

displayed on the equipment and/or specific

in this installation instruction included with
the dryer.

2) Dryer(s) must not be installed or stored in

an area where it wili be exposed to water
and/or weather.

3) Please post in a prominent location.

Instructions to be followed in the event the
user smells gas. The information posted
shali be obtained by consulting with your
local gas supplier.

4) The wiring diagram for the dryer is

located in the front electrical control box

area.

5) You must disconnect and lock out the

electric supply and gas supply before any
covers or guards are removed from the
machine to allow access for cleaning,
adjusting, instailation, or testing of any
equipment per OSHA (Occupational Safety

and Health Administration) Standards.

GENERAL INFORMATION

RECEIVING AND HANDLING

The dryer is shipped in a protective polyethyl­
ene stretch wrap cover and protective corners

and top cover or an enclosed cardboard carton
as a means of protection in transit. Upon
delivery, the shipping carton and wooden skid
should be visually inspected for shipping dam­
age. If carton or wooden skid is damaged,

inspect further

before carrier leaves.

Dryers Damaged in Shipment

1. All dryers should be Inspected upon receipt

and

before

they are signed for.

2. If there Is suspected damage or actual

damage, the trucker’s receipt should be so
noted.

3. If the dryer Is damaged beyond repair, it

should be refused. Those dryers which were
not damaged in a damaged shipment
should be accepted, but the number re­
ceived and number refused must be noted

on the receipt.

4. If you determine that the dryer has been

damaged after the trucker has ieft your
location, you should call your local freight
terminal immediately and request an in­
spection and freight claim form. The freight

company considers this concealed damage.
This type of freight claim is very difficult to

get paid and becomes extremely difficult
when more than a day or two passes after
the freight was delivered.

It Is your responsibility to file freight ciaims.
Dryer/parts damaged in transit

cannot be

claimed under parts warranty.

5. If you need further assistance in handling

the situation, please contact the distributor.

IMPORTANT: THE DRYER SHOULD BE

TRANSPORTED AND HANDLED IN AN

UPRIGHT POSITION AT ALL TIMES.

IMPORTANT: FOR YOUR CONVENIENCE,
LOG THE FOLLOWING INFORMATION.

DATE OF PURCHASE-----------

MODEL NO. MDG12Q

DISTRIBUTORS NAME.

SERIAL NUMBER(S)____

Advertising