SINGER 9210 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
INSERTING WOUND BOBBIN
RAISING BOBBIN THREAD
Open slide plate.
Insert bobbin into bobbin case.
Guide thread into notch (1)
and then into notch (2).
Hold thread and close slide
plate.
Hold needle thread.
Turn hand wheel towards you
lowering, then raising needle.
Gently pull needle thread to raise
bobbin thread.
Open loop.
Pull both threads back.
-
7
-
Advertising