Changing presser feet, Replacing presser foot with shank – SINGER 9210 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising

CHANGING PRESSER FEET

REPLACING PRESSER FOOT WITH SHANK

Lift toe of presser foot (1) up,
until it snaps off shank (2).

Take foot off machine.

Center new presser foot (1)
under shank (2).

Lower presser foot lifter.

Press screw (3) dowm.

ATTACHING FEED COVE

Loosen presser foot screw and
remove foot.

Hook new foot around presser

bar.

Tighten screw.

Open slide plate.

Press tab (1) and (2) into
holes on needle plate.

Close slide plate.

Advertising