SINGER 3214 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Patching
Set machine as shown.
Mending
r
Place the patch over the worn part. Pull thread
ends toward back or left when starting sewing.
Sew along the edge of the patch on the right side.
Trim away the worn part close to the seam on
back side.
Mending a rip
Set machine in the same way as for patching.
Sew the edges of tear together first. Then sew two
more seams on either side.
A piece of interfacing can be placed underneath
to reinforce the rip.
-
3 0
-
Advertising
This manual is related to the following products: