SINGER 3214 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
4. STARTING TO SEW
Bobbin Winding
Set needle in the highest position by turning
handwheel towards you.
Remove accessory box to locate bobbin case.
Open shuttle cover.
Open latch of bobbin case and remove case.
Close latch of bobbin case and bobbin comes out
^
easily.
Put thread on spool pin. (See page 8) Draw thread
from spool pin through thread guide and preten
sion device, following numbers ®, © and ®.
Advertising
This manual is related to the following products: