SINGER 3214 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Place bobbin in its case with thread running
clockwise.
Inserting Bobbin
Guide thread into slot @ of bobbin case.
Pulling thread to left, bring it under tension spring
^
then to delivery eye (B).
Raise needle to the highest position.
Leave end of thread about 10 cm (4") from bobbin
case.
Take hold of latch and push bobbin case into
shuttle. Release latch when bobbin case is fully
inserted.
-
7
-
Advertising
This manual is related to the following products: