SINGER 3214 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Applique Work

Set machine as shown.

Draw design on the material that is to be used for

your applique and cut it out. Place cut-out on base

material and baste it in place.

Sew around outline with zigzag stitch adjusting
stitch length and width according to shape and
size of cut-out.

To change direction at corners, or to sew very
small circles, stop machine, positioning needle
just away from edge of cut-out, make sure needle

is in down position, lift presser foot and turn
material.
Lower presser foot and continue sewing.

Sew a few stitches at end with zigzag width at 0.

This will prevent threads form pulling out.

Advertising
This manual is related to the following products: